VictorSoft 24 Big Round LED Studio light Aluminum housing Bi-color
|LED Light Source||LEDs|
|Brightness/Light Intensity||5639Lux/m, 1571Lux/2m|
|Lamp Lifetime||50,000 hrs|
|Working Voltage||AC100-240V, DC24-30V|
|External Power||Sony V-mount battery plate 2pcs|
|Mount||Adjustable stand mount with combo pin receiver baby 5/8”and junior
Standard set Includied
- 1 x VictorSoft 24 (VR-4500ASVL)
- 1 x Yoke
- 1 x AC power adapter
- 1 x Power Cord
- 1 x DMX cable
- 1 x Safety cable
- Honeycomb Grid
- Creative mask
- Bag for one light
- VictorSoft (strong and soft) that no addtional diffusor need.
- Power draw 100W via AC power adatper or V-lock broadcating battery
- Removabe, clip-in 4-way barndoor, provided with the light.
- Bi-color 3200K to 5600K, from Tungsten to Daylight variable.
- High CRI of 96 and above.
- 120° wide beam, flicker free.
- Rear LCD display of the brightness and color temperature.
- Metal construction and traditional 1x1 size
- Easy to operate when out of the box, used for both studio or
location work as a photo light.
VictorSoft 24 VR-4500ASVL has the special round design of the light
which provide a different choice among all the tradtional squre and
rectangular size. As well, it gives out beam with no multiple
shadow and hotspots, which is different to those dot LED lights. It
is the chip LEDs that the light use. It has a wider beam angle 120
degree than the 30-60 degree of traditional dot LED lights have.
The light-emitting area of VictoSoft 24 is 76x85cm and the
illuminance reaches 5639Lux/m.
The light is designed to use the honeycomb grid when necessary. And
the optional creative mask give the possibility to get the
beautiful eyelight or reflective effect.The light has a built-in
diffusor that people do not need to use additonal white diffusors.
It becomes so easy to operate when out of the box. Put it on a
light stand, clip in the barndoor and then power the light with the
provided AC power adatper and power cord.
1. It is no need to replace the LED bulbs in normal use.Please do
not disassemble the light or solder the LED bulbs by the
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence
LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do
not use on the light directly.
5. Please do discharge and recharge the battery at least once for
every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may
seriously damage the battery or cause a
8. It is not allowed to throw the battery into fire.
The LED light is guaranteed for 12 months.