VictorSoft 2x2 square LED Studio light, Bi-color Dimmable Ultra
|LED Light Source||LEDs|
|Brightness/Light Intensity||8850Lux/m, 2600Lux/2m|
|Lamp Lifetime||50,000 hrs|
|Working Voltage||AC100-240V, DC24-30V|
|External Power||Sony V-mount battery plate 2pcs|
|Mount||Yoke with standard pin receiver baby 5/8”|
Standard set Includied
- 1 x Victor 2x2 (V-5000ASVL)
- 1 x Barndoor
- 1 x Yoke
- 1 x AC power adapter
- 1 x Power Cord
- 1 x DMX cable
- 1 x Safety cable
- Honeycomb Grid
- Bag for one light
- VictorSoft (strong and soft) that no addtional diffusor need.
- Power draw 100W via AC power adatper or V-lock broadcating battery
- Removabe, clip-in 4-way barndoor, provided with the light.
- Bi-color 3200K to 5600K, from Tungsten to Daylight variable.
- High CRI of 96 and above.
- 120° wide beam, flicker free.
- Rear LCD display of the brightness and color temperature.
- Metal construction and traditional 1x1 size
- Easy to operate when out of the box, used for both studio or
location work as a photo light.
VictorSoft series has big progress in lighting source and it
performs as well as C series LED edge light in color rendering
property, but much better in illuminance and light-emitting
area.The light-emitting area of VictoSoft 2x2 is 76x85cm and the
illuminance reaches 8850Lux/m. It has the biggest lighting-emitting
area among all the square size lights Lishuai has.
VictorSoft 2x2 is a powerful soft light. It draws 300W and gives a
rather beautiful and strong but soft light beam with no hotspots
and multiple showdows that a traditional LED light may have.
The light has a built-in diffusor that people do not need to use
additonal white diffusors. It becomes so easy to operate when out
of the box. Put it on a light stand, clip in the barndoor to the
light and then power the light with the provided AC power adatper
and power cord. Or use it in the Studio with the DMX function of
the light. The AC adapter now can be attached to the light that no
worry the adapter will dropped down or the cable become messy.
1. It is no need to replace the LED bulbs in normal use.Please do
not disassemble the light or solder the LED bulbs by the
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence
LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do
not use on the light directly.
5. Please do discharge and recharge the battery at least once for
every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may
seriously damage the battery or cause a
8. It is not allowed to throw the battery into fire.
The LED light is guaranteed for 12 months.