VictorSoft 1.5x1.5 Square LED Studio Light Bi-color Dimmable Ultra
|LED Light Source||LEDs|
|Brightness/Light Intensity||5180Lux/m, 1458Lux/2m|
|Beam angle||120°wide beam|
|Lamp Lifetime||50,000 hrs|
|Working Voltage||AC100-240V, DC24-30V|
|External Power||Sony V-mount battery plate or AB plate|
|Mount||Yoke with standard pin receiver baby 5/8”|
Standard set Includied
- 1 x Victor 1.5x1.5 (V-3000ASVL)
- 1 x Barndoor
- 1 x Yoke
- 1 x AC power adapter
- 1 x Power Cord
- 1 x DMX cable
- 1 x Safety cable
- Honeycomb Grid
- Bag for one light
- VictorSoft (strong and soft) that no addtional diffusor need.
- Power draw 100W via AC power adatper or V-lock broadcating battery
- Removabe, clip-in 4-way barndoor, provided with the light.
- Bi-color 3200K to 5600K, from Tungsten to Daylight variable.
- High CRI of 96 and above.
- 120° wide beam, flicker free.
- Rear LCD display of the brightness and color temperature.
- Metal construction and traditional 1x1 size
- Easy to operate when out of the box, used for both studio or
location work as a photo light.
VictorSoft 1.5x1.5 V-3000ASVL is a powerful soft light. It draws
200W and gives a rather beautiful and strong but soft light beam
with no hotspots and multiple showdows that a traditional LED light
It is the chip LEDs that the light use. It has a wider beam angle
120 degree than the 30-60 degree of traditional dot LED lights
have. It gives a much wider shooting area. It gives a much wider
shooting area. And with the provided barndoor and the optional
honeycomb grid, the light beam can be controlled in a different
The light has a built-in diffusor that people do not need to use
additonal white diffusors. It becomes so easy to operate when out
of the box. Put it on a light stand, clip in the barndoor and then
power the light with the provided AC power adatper and power cord.
Or use it in the Studio with the DMX function of the light.
1. It is no need to replace the LED bulbs in normal use.Please do
not disassemble the light or solder the LED bulbs by the
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence
LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do
not use on the light directly.
5. Please do discharge and recharge the battery at least once for
every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may
seriously damage the battery or cause a
8. It is not allowed to throw the battery into fire.
The LED light is guaranteed for 12 months.